Skip to content
Vidimost
Security Systems & Networking

Control iD iDUHF UHF Vehicle Tag Reader — 15-Meter Long-Range Garage / Gate Reader for Chicago Commercial Properties

Model / Series: iDUHF

The Control iD iDUHF is a long-range UHF vehicle tag reader and access controller in one — reads passive UHF tags up to 15 meters away, holds 200,000+ users locally, integrates with garage and gate controllers via Wiegand, OSDP, TCP/IP, RS-485, and RS-232. IP65 enclosure, 12 V power, −20 °C to 45 °C operation. The Chicago choice for commercial-scale garage and gated-perimeter installations where long read range matters.

Control iD iDUHF

Specifications

Brand
Control iD
Series
Control iD iDUHF
Model
iDUHF
Form Factor
Long-range UHF vehicle tag reader + access controller (combined unit)
Read Range
Up to 15 m (depending on tag type and antenna installation conditions; per Control iD spec)
User Capacity
More than 200,000 registered users
Tag Read
Passive UHF vehicle tags
Network
1× 10/100 Mbps Ethernet (native), 1× RS-485 with 120 Ω termination (native), 1× RS-232 (native)
Output Protocols
TCP/IP + Wiegand + OSDP — integrates with most garage door and gate controllers
Wiegand Bit Formats
26 (default), 32, 34, or 66 bits
Relay Output
1× relay rated up to 30 VAC / 5 A
Power
External 12 V DC supply (not included); 3.5 W (300 mA) rated consumption
Operating Temperature
−20 °C to 45 °C
Environmental Protection
IP65 (dust and water resistance)
Dimensions (Main Unit)
420 × 420 × 60 mm (W × H × D)
Dimensions (Antenna)
52 × 52 × 22 mm (W × H × D)
Weight (Main Unit)
2,270 g
Weight (External Access Control Module)
35 g

Best Fit & Recommended For

Chicago commercial parking-garage entry and exit gates with 200+ users
Multi-tenant residential parking-garage gates at suburban Chicagoland HOAs
Office-building parking deck entries with employee + visitor tag mix
Hospital and healthcare campus parking facilities
Education facility parking lots and faculty / staff gated areas
Industrial / warehouse gated perimeters and yard-truck access
Hospitality property valet and self-park gate access
Government / municipal facility parking and gated entries
Federal facility parking with 200K-user capacity per reader
Long-range vehicle access where the reader must work at 10–15 m for hands-free entry

Control iD iDUHF UHF Vehicle Tag Reader — 15-Meter Long-Range

The Control iD iDUHF is a long-range UHF vehicle tag reader and access controller in one unit — combines an integrated UHF antenna and reader (up to 15-meter read range) with an on-board controller that holds 200,000+ registered users locally and integrates with garage and gate hardware over Wiegand, OSDP, TCP/IP, RS-485, and RS-232. The right pick for Chicago commercial parking garages, multi-tenant residential gates, and large gated perimeters where the reader must reliably identify vehicle tags at distance for hands-free entry.

What’s Confirmed by the Official Control iD Spec

These specifications come directly from the manufacturer’s published product page and datasheet for the iDUHF:

  • Read range: up to 15 m (“depending on tag type and antenna installation conditions”)
  • User capacity: more than 200,000 registered users
  • Network: 1× 10/100 Mbps Ethernet (native) + 1× RS-485 with 120 Ω termination + 1× RS-232
  • Output protocols: TCP/IP, Wiegand (26 default, 32, 34, or 66 bits), and OSDP — integrates with most garage door and gate controllers
  • Relay: 1× relay rated up to 30 VAC / 5 A — drives a gate motor or strike directly when used as standalone
  • Power: external 12 V DC supply (sold separately); 3.5 W (300 mA) rated consumption
  • Operating temperature: −20 °C to 45 °C
  • Ingress protection: IP65
  • Dimensions: main unit 420 × 420 × 60 mm; antenna 52 × 52 × 22 mm
  • Weight: main unit 2,270 g; external access control module 35 g

iDUHF vs. iDUHF Lite — Which One Fits the Project

Control iD ships two configurations of the same UHF reader-controller architecture. They share the same firmware, the same protocol set, and the same user-capacity ceiling — they differ in read range and physical size:

FeatureiDUHF (this page)iDUHF Lite
Read rangeUp to 15 mUp to 12 m
Main unit dimensions420 × 420 × 60 mm (large)260 × 260 × 70 mm (compact)
Main unit weight2,270 g1,280 g
User capacity200,000+200,000+
Network / protocolsEthernet, RS-485, RS-232, Wiegand, OSDP, TCP/IPSame
IP ratingIP65IP65
Power12 V DC, 3.5 W12 V DC, 3.5 W
Best fitWide gate spans, parking-deck entries, larger commercial perimeters where 15 m read range is requiredCompact form factor for residential garages, smaller commercial gates, and Brivo-paired installs

When to choose iDUHF (this product) over the Lite:

  • Wide vehicle entries (parking-garage entries with multiple lanes, large commercial driveways) where the reader has to capture the tag well before the vehicle reaches the gate
  • Gated commercial perimeters where the reader is mounted at distance from the lane and needs the extra read range
  • Large multi-tenant residential properties with 500+ vehicles where the bigger antenna helps maintain consistent read rates during peak in/out times

For tighter physical positions (residential garages, smaller commercial gates) the more compact iDUHF Lite is usually the better fit and is the model Vidimost most often pairs with Brivo cloud-managed access at Chicago HOA and small-commercial sites.

How It Pairs with Brivo, Paxton, and Other Access Platforms

The iDUHF outputs Wiegand 26 (default) and OSDP — two protocols every modern commercial access control panel accepts. Vidimost typically wires it as a Wiegand reader feeding the parent controller:

  • Brivo ACS300-E-B / ACS6100 — Brivo panels accept Wiegand devices that transmit up to 255-bit data and OSDP readers over RS-485, so the iDUHF (Wiegand 26 / 32 / 34 / 66 or OSDP) drops in cleanly. The iDUHF reads the vehicle tag, sends the credential ID to the Brivo panel, the Brivo cloud admin makes the access decision, and the panel triggers the gate motor.
  • Paxton10 Door Controller (010-403) / Paxton Net2 Plus — same Wiegand path; Paxton’s controllers accept Wiegand readers, so the iDUHF integrates without proprietary firmware.
  • Standalone gate-motor mode — for properties without a centralized access platform, the iDUHF’s on-board 30 VAC / 5 A relay can drive a gate motor directly, with up to 200,000 users programmed locally.

Where the Control iD iDUHF Wins in Chicago

  • Commercial parking-garage entry and exit gates with 200+ users
  • Multi-tenant residential parking-garage gates at suburban Chicagoland HOAs (Wilmette, Glencoe, Highland Park, Schaumburg, Hoffman Estates, Naperville, Wheaton, Oak Brook)
  • Office-building parking decks with employee + visitor tag mix
  • Hospital and healthcare campus parking facilities
  • Education facility parking lots and faculty / staff gated areas
  • Industrial / warehouse gated perimeters and yard-truck access
  • Hospitality property valet and self-park gate access
  • Government / municipal facility parking and gated entries
  • Federal facility parking with 200K-user capacity per reader
  • Long-range vehicle access where the reader must work at 10–15 m for hands-free entry

Local Chicago Coverage

Vidimost installs the Control iD iDUHF across the full Chicago metropolitan area for commercial parking-garage and gated-perimeter access deployments.

  • Control iD iDUHF Lite — compact sibling for residential and smaller commercial gates
  • Brivo ACS300-E-B — Wiegand-paired cloud panel for combined door + gate access
  • Brivo ACS6100 — high-density Brivo panel for large multi-door + gated-perimeter projects
  • Paxton10 Door Controller (010-403) — Wiegand-paired Paxton10 cloud option
  • Paxton Net2 Plus — on-prem Net2 alternative for regulated industries
  • Compatible passive UHF vehicle tags (sold separately, specified at site walkthrough per gate condition)

Professional Installation by Vidimost

Vidimost LLC installs the Control iD iDUHF across Chicago for commercial parking-garage, multi-tenant residential, healthcare, education, industrial, and government gated-access projects. Full-scope service includes site walkthrough, gate-geometry survey (read range vs. lane width), reader and antenna mounting, IP65-rated weatherproofing of cable terminations, Wiegand or OSDP wiring back to the parent access panel (Brivo / Paxton / standalone), tag enrollment, gate-motor relay integration where used standalone, and operator training. Contact us for a free site walkthrough and quote.

Frequently Installed Together

Control iD

Control iD iDUHF Lite

The Control iD iDUHF Lite is the compact sibling of the iDUHF — same firmware and protocol set, but in a smaller 260 × 260 × 70 mm body with up to 12-meter read range. 200,000+ user capacity, IP65, Wiegand (26 / 32 / 34 / 66 bits) + OSDP + TCP/IP / RS-485 / RS-232. The Chicago go-to UHF reader for residential garage gates, smaller commercial perimeters, and Brivo cloud-paired installations where compact form factor matters as much as long read range.

View →

Brivo

Brivo ACS300-E-B

The Brivo ACS300-E-B is a modern 2-door cloud-managed access control panel — Ethernet + WiFi connectivity, optional cellular, OSDP v2 and Wiegand reader support, integrated battery-backup-ready enclosure with tamper detection. The standard Brivo Access controller for Chicago commercial offices, retail, multi-tenant residential, healthcare clinics, and small-to-mid commercial buildings managed on the Brivo Access cloud.

View →

Brivo

Brivo ACS6100

The Brivo ACS6100 is the next-generation high-density multi-door cloud-managed access control panel — successor to the ACS6000, expandable across multiple daughter boards for 16, 24, 32+ doors per panel chassis. The Chicago choice for enterprise commercial buildings, multi-floor offices, hospitals, schools, and multi-building campuses with centralized panel-room architecture.

View →

Paxton

Paxton10 010-403 Door Controller

The Paxton10 Door Controller (010-403) is the single-door PCB controller for the Paxton10 cloud-managed access control system — supplied as a board that mounts inside a customer-supplied enclosure or pre-wired backbox. Encrypted RS-485 to Paxton10 readers; supports 1 door per controller, multiple controllers federated under one Paxton10 cloud account.

View →

Paxton

Paxton Net2 Plus Controller

The Paxton Net2 Plus controller is the on-premises door controller for Paxton Net2 access control — supplied in a metal enclosure with integrated power supply and battery-backup space. Manages 1 or 2 doors per controller (depending on SKU), connects to the Net2 server over Ethernet, supports video verification and integration with the broader Paxton ecosystem. The Chicago choice for projects that require local data residency rather than cloud admin.

View →