Skip to content
Vidimost
Security Systems & Networking

Control iD iDUHF Lite UHF Vehicle Tag Reader — Compact 12-Meter Garage / Gate Reader for Chicago HOA + Brivo Deployments

Model / Series: iDUHF Lite

The Control iD iDUHF Lite is the compact sibling of the iDUHF — same firmware and protocol set, but in a smaller 260 × 260 × 70 mm body with up to 12-meter read range. 200,000+ user capacity, IP65, Wiegand (26 / 32 / 34 / 66 bits) + OSDP + TCP/IP / RS-485 / RS-232. The Chicago go-to UHF reader for residential garage gates, smaller commercial perimeters, and Brivo cloud-paired installations where compact form factor matters as much as long read range.

Control iD iDUHF Lite

Specifications

Brand
Control iD
Series
Control iD iDUHF
Model
iDUHF Lite
Form Factor
Compact long-range UHF vehicle tag reader + access controller (combined unit)
Read Range
Up to 12 m (depending on tag type and antenna installation conditions; per Control iD spec)
Horizontal Capture Angle
30° each side (per Control iD spec)
User Capacity
More than 200,000 registered users / records
Tag Read
Passive UHF vehicle tags
Network
1× 10/100 Mbps Ethernet (native), 1× RS-485 with 120 Ω termination (native), 1× RS-232 (native)
Output Protocols
TCP/IP + Wiegand + OSDP — integrates with most garage door and gate controllers
Wiegand Bit Formats
26 (default), 32, 34, or 66 bits
Relay Output
1× relay rated up to 30 VAC / 5 A
Power
External 12 V DC supply (not included); 3.5 W (300 mA) rated consumption
Operating Temperature
−20 °C to 45 °C
Environmental Protection
IP65 (dust and water resistance)
Dimensions (Main Unit)
260 × 260 × 70 mm (W × H × D)
Dimensions (Antenna)
52 × 52 × 22 mm (W × H × D)
Weight (Main Unit)
1,280 g
Weight (External Module)
35 g

Best Fit & Recommended For

Chicago multi-tenant residential garage gates at suburban Chicagoland HOAs
Brivo cloud-paired residential and small-commercial gate access (Wiegand to ACS-100 / ACS300-E-B / ACS6100)
Office-park and small-commercial parking-lot gate access
Education facility staff parking gate access
Healthcare clinic outpatient parking gate access
Hospitality boutique-hotel valet and back-of-house gate
Industrial small-yard gate access for trucks and personnel vehicles
Property management portfolios with multiple gates across small-to-mid commercial buildings
Government and municipal small-facility parking gate access
Compact-installation positions where the larger iDUHF physical footprint does not fit

Control iD iDUHF Lite — Compact UHF Vehicle Tag Reader

The Control iD iDUHF Lite is the compact sibling of the iDUHF — same firmware, same protocol set, same 200,000+ user capacity, same IP65 rating, but packaged in a smaller 260 × 260 × 70 mm body at 1,280 g (vs. 420 × 420 × 60 mm and 2,270 g for the standard iDUHF). Read range is up to 12 m instead of 15 m. Vidimost’s go-to UHF reader for residential garage gates at suburban Chicagoland HOAs and for Brivo cloud-paired installations at small-to-mid commercial properties where compact form factor matters and 12 m is plenty for the gate geometry.

What’s Confirmed by the Official Control iD Spec

These specifications come directly from the manufacturer’s published product page and datasheet for the iDUHF Lite:

  • Read range: up to 12 m (“depending on tag type and antenna installation conditions”)
  • Horizontal capture angle: 30° each side (per Control iD spec)
  • User capacity: more than 200,000 registered users / records
  • Network: 1× 10/100 Mbps Ethernet (native) + 1× RS-485 with 120 Ω termination + 1× RS-232
  • Output protocols: TCP/IP, Wiegand (26 default, 32, 34, or 66 bits), and OSDP
  • Relay: 1× relay rated up to 30 VAC / 5 A
  • Power: external 12 V DC supply (not included); 3.5 W (300 mA) rated consumption
  • Operating temperature: −20 °C to 45 °C
  • Ingress protection: IP65
  • Dimensions: main unit 260 × 260 × 70 mm; antenna 52 × 52 × 22 mm
  • Weight: main unit 1,280 g; external module 35 g

iDUHF Lite vs. iDUHF — Which One Fits the Project

Both readers run the same firmware. Choose based on read range and physical fit:

FeatureiDUHF Lite (this page)iDUHF (standard)
Read rangeUp to 12 mUp to 15 m
Main unit dimensions260 × 260 × 70 mm (compact)420 × 420 × 60 mm (large)
Main unit weight1,280 g2,270 g
Horizontal capture angle30° each side (per Lite spec)(per Control iD spec)
User capacity200,000+200,000+
Network / protocolsEthernet, RS-485, RS-232, Wiegand, OSDP, TCP/IPSame
IP ratingIP65IP65
Power12 V DC, 3.5 W12 V DC, 3.5 W
Best fitResidential garages, smaller commercial gates, Brivo cloud-paired installsWide commercial gate spans, parking-deck entries needing 15 m read range

When to choose iDUHF Lite (this product) over the standard iDUHF:

  • Residential garage gates where 12 m read range is plenty — most residential lanes are 4–8 m wide so the reader captures the tag well before the vehicle reaches the gate
  • Smaller commercial gates where the more compact body fits cleaner mounting positions
  • Brivo-paired installations at suburban Chicagoland HOAs and small-to-mid commercial — Vidimost most often pairs the Lite with Brivo cloud-managed access (see “Brivo Pairing” section below)
  • Cost-conscious projects where the Lite’s smaller form factor and lower price still cover the gate’s read-range requirement

For wider gate spans (multi-lane parking-deck entries, large commercial driveways) where the reader must work at 13–15 m, step up to the standard iDUHF.

Brivo Pairing — Why Vidimost Specifies the iDUHF Lite as Default Brivo Companion

The user-facing question is “How does the gate reader talk to the Brivo cloud?” — and the answer is Wiegand 26. The iDUHF Lite outputs Wiegand 26 by default (with 32 / 34 / 66 also configurable), and Brivo’s installation manuals confirm the Brivo controllers (ACS-100, ACS300-E-B, ACS6100) accept Wiegand devices that transmit up to 255-bit data plus OSDP readers over RS-485. So the integration is straightforward:

  1. iDUHF Lite reads a vehicle UHF tag at the gate
  2. Sends the credential ID to the parent Brivo panel via Wiegand (or OSDP if the panel supports it)
  3. Brivo Access cloud makes the authorization decision (resident match, schedule check, audit-trail logging)
  4. Brivo panel triggers the gate motor relay — gate opens

Why the Lite specifically (and not the standard iDUHF) is the most-installed Vidimost + Brivo pairing:

  • Compact mounting — fits the typical Chicago HOA / small-commercial gate post or pier without rebuild
  • 12 m read range is sufficient for the lane geometry at most multi-tenant residential and small-commercial gates
  • Lower price point matches the Brivo cloud-managed segment (HOA / small commercial) better than the larger iDUHF’s premium
  • Same OSDP / Wiegand protocols as the standard iDUHF — no functional sacrifice in the integration

For larger projects (parking decks, big commercial perimeters) the standard iDUHF on Brivo or Paxton10 is the right step up.

Where the Control iD iDUHF Lite Wins in Chicago

  • Multi-tenant residential garage gates at suburban Chicagoland HOAs — Wilmette, Glencoe, Highland Park, Schaumburg, Hoffman Estates, Naperville, Wheaton, Oak Brook
  • Brivo cloud-paired residential and small-commercial gate access (Wiegand to ACS-100 / ACS300-E-B / ACS6100)
  • Office-park and small-commercial parking-lot gate access
  • Education facility staff parking gate access
  • Healthcare clinic outpatient parking gate access
  • Hospitality boutique-hotel valet and back-of-house gate
  • Industrial small-yard gate access for trucks and personnel vehicles
  • Property management portfolios with multiple gates across small-to-mid commercial buildings
  • Government and municipal small-facility parking gate access
  • Compact-installation positions where the larger iDUHF physical footprint does not fit

Local Chicago Coverage

Vidimost installs the Control iD iDUHF Lite across the full Chicago metropolitan area as the default UHF gate reader on Brivo-paired residential and small-commercial deployments.

Professional Installation by Vidimost

Vidimost LLC installs the Control iD iDUHF Lite across Chicago for residential garage gates, small-commercial perimeters, and Brivo cloud-paired access deployments. Full-scope service includes site walkthrough, gate-geometry survey (12 m read range vs. lane width), compact-body reader and antenna mounting, IP65-rated weatherproofing of cable terminations, Wiegand or OSDP wiring back to the parent access panel (typically Brivo at HOA / small-commercial sites), tag enrollment, gate-motor relay integration where used standalone, and operator training. Contact us for a free site walkthrough and quote.

Frequently Installed Together

Control iD

Control iD iDUHF

The Control iD iDUHF is a long-range UHF vehicle tag reader and access controller in one — reads passive UHF tags up to 15 meters away, holds 200,000+ users locally, integrates with garage and gate controllers via Wiegand, OSDP, TCP/IP, RS-485, and RS-232. IP65 enclosure, 12 V power, −20 °C to 45 °C operation. The Chicago choice for commercial-scale garage and gated-perimeter installations where long read range matters.

View →

Brivo

Brivo ACS-100

The Brivo ACS-100 is a single-door cloud-managed smart controller with built-in WiFi and Ethernet connectivity, PoE power option, and an integrated reader interface — purpose-built for fast single-door deployments at Chicago commercial properties without the cost or wiring of a separate reader and panel.

View →

Brivo

Brivo ACS300-E-B

The Brivo ACS300-E-B is a modern 2-door cloud-managed access control panel — Ethernet + WiFi connectivity, optional cellular, OSDP v2 and Wiegand reader support, integrated battery-backup-ready enclosure with tamper detection. The standard Brivo Access controller for Chicago commercial offices, retail, multi-tenant residential, healthcare clinics, and small-to-mid commercial buildings managed on the Brivo Access cloud.

View →

Brivo

Brivo ACS6100

The Brivo ACS6100 is the next-generation high-density multi-door cloud-managed access control panel — successor to the ACS6000, expandable across multiple daughter boards for 16, 24, 32+ doors per panel chassis. The Chicago choice for enterprise commercial buildings, multi-floor offices, hospitals, schools, and multi-building campuses with centralized panel-room architecture.

View →

Paxton

Paxton10 010-403 Door Controller

The Paxton10 Door Controller (010-403) is the single-door PCB controller for the Paxton10 cloud-managed access control system — supplied as a board that mounts inside a customer-supplied enclosure or pre-wired backbox. Encrypted RS-485 to Paxton10 readers; supports 1 door per controller, multiple controllers federated under one Paxton10 cloud account.

View →

Paxton

Paxton Net2 Plus Controller

The Paxton Net2 Plus controller is the on-premises door controller for Paxton Net2 access control — supplied in a metal enclosure with integrated power supply and battery-backup space. Manages 1 or 2 doors per controller (depending on SKU), connects to the Net2 server over Ethernet, supports video verification and integration with the broader Paxton ecosystem. The Chicago choice for projects that require local data residency rather than cloud admin.

View →