Ubiquiti UniFi PoE+ Adapter 30W (U-PoE+) — 48V Single-Port PoE+ Injector for Chicago

Ubiquiti UniFi PoE+ Adapter 30W (U-PoE+)

The Ubiquiti UniFi PoE+ Adapter (model U-PoE+) is a 30 W single-port PoE+ injector — Vidimost’s go-to PoE injector for standard UniFi access points and mid-range IP cameras. 48 V DC @ 0.65 A output, 30 W total, gigabit LAN, 87% efficiency, NDAA-compliant. The middle ground between the entry-level U-PoE 15W and the higher-power U-PoE++ 60W.

What’s Confirmed by the Official Ubiquiti Spec

These specifications come directly from store.ui.com’s published U-PoE+ product page:

• Model: U-PoE+
• Output: 48 V DC @ 0.65 A — 30 W total
• Input: 100–240 V AC at 50/60 Hz; max input current 0.75 A
• Efficiency: 87%
• Data port: Gigabit LAN, RJ45 shielded socket
• Powering method: 2-pair — pins 4, 5 (+) and 7, 8 (−)
• Operating temperature: 0 to 40 °C (32 to 104 °F)
• Operating humidity: 10 to 95% non-condensing
• Surge protection: 1500 A (8/20 μs) power; 36 A (10/1000 μs) data peak pulse current
• Dimensions: 93 × 62 × 35 mm (3.7 × 2.4 × 1.4 in)
• Weight: 156 g (5.5 oz)
• Power cable: Included (IEC-320 C6 connector)
• NDAA-compliant: Yes
• Certifications: CE, FCC, IC, UL, CCC

When U-PoE+ Fits — Standard UniFi APs and Mid-Range Cameras

Pick the U-PoE+ when:

• The device is a standard UniFi access point (most U6 / U7 series APs) or a mid-range IP camera that draws between 15 W and 30 W
• A single-port injector is sufficient
• The site lacks a PoE+-capable network switch port or has a fully-utilized PoE budget

For lower-power devices (under 15 W), see the U-PoE 15W. For higher-power devices, step up to the U-PoE++ 60W or 10G PoE+++ 90W.

Ubiquiti PoE Adapter Family Comparison

Model	Wattage	Voltage / Current	Best Fit
U-PoE	15 W	48 V @ 0.32 A	Low-power UniFi APs, small IP cameras
U-PoE+ (this page)	30 W	48 V @ 0.65 A	Standard UniFi APs, mid-range cameras
U-PoE++	60 W	48 V @ 1.25 A	Higher-power APs, PTZ cameras
UACC-PoE+++-10G	90 W	54 V @ 1.67 A	Top-tier UniFi devices needing multi-gig data + max power

Where the Ubiquiti U-PoE+ 30W Wins in Chicago

• Commercial standard UniFi access point single-port power
• Mid-range IP camera installations
• UniFi APs (U6, U7 standard) without available PoE+ switch port
• Multi-tenant residential lobby AP installation
• Office building tenant suite AP power
• Healthcare clinic AP deployment
• Education facility classroom AP installation
• Hospitality property AP single-port power
• Retail storefront AP power
• Industrial / warehouse single-AP power

Local Chicago Coverage

Vidimost installs the Ubiquiti U-PoE+ 30W across the full Chicago metropolitan area as the standard single-port PoE+ injector for UniFi deployments.

Recommended Pairings

• Ubiquiti U-PoE 15W — entry-level sibling for low-power devices
• Ubiquiti U-PoE++ 60W — higher-power sibling
• Ubiquiti 10G PoE+++ 90W — top-tier with multi-gig data
• UniFi access points / cameras (specified per project)

Professional Installation by Vidimost

Vidimost LLC installs the Ubiquiti U-PoE+ 30W across Chicago for standard UniFi PoE+ deployments. Full-scope service includes site walkthrough, device-power verification (15-30 W), CAT5e/CAT6 cabling, AC primary placement, and integration with the broader UniFi network. Contact us for a free site walkthrough and quote.