PoE Injectors
PoE injectors add Power over Ethernet capability to network connections where the upstream switch does not provide PoE. They are commonly used to power individual cameras, access points, or intercom stations at remote locations or in retrofit installations where replacing the switch is not practical.
4 products in this category
Ubiquiti
Ubiquiti U-PoE (15W)
The Ubiquiti UniFi PoE Adapter (U-PoE, 15W) is a passive single-port PoE injector — 48 V DC @ 0.32 A output (15 W total), gigabit LAN port, RJ45 shielded socket, 2-pair powering on pins 4-5 (+) / 7-8 (−). 100-240 VAC input, 84.25%+ efficiency, 1500 A surge discharge, NDAA-compliant. The Chicago choice for low-power UniFi access points and IP cameras when a PoE switch port is unavailable or insufficient.
Ubiquiti
Ubiquiti U-PoE+ (30W)
The Ubiquiti UniFi PoE+ Adapter (U-PoE+, 30W) is a single-port PoE+ injector — 48 V DC @ 0.65 A output (30 W total), gigabit LAN port, 87% efficiency. Surge / peak pulse / overcurrent protection (1500 A power, 36 A data peak pulse). 100-240 VAC input. NDAA-compliant. The Chicago go-to PoE injector for standard UniFi access points, mid-range IP cameras, and other 802.3at-class devices.
Ubiquiti
Ubiquiti U-PoE++ (60W)
The Ubiquiti UniFi PoE++ Adapter (U-PoE++, 60W) is a single-port high-power PoE injector — 48 V DC @ 1.25 A output (60 W total), gigabit LAN port, supports PoE / PoE+ / PoE++ / PoE+++ devices. 85%+ efficiency, 1500 A surge discharge, NDAA-compliant. The Chicago choice for higher-power UniFi devices like PTZ cameras, mesh APs, and high-power access points where 30 W is insufficient.
Ubiquiti
Ubiquiti 10G PoE+++ (90W)
The Ubiquiti UniFi 10G PoE+++ Adapter (UACC-PoE+++-10G, 90W) is the top-tier Ubiquiti single-port PoE injector — 54 V DC @ 1.67 A output (90 W total), branded for 10G data with multi-gigabit LAN connectivity. Surge / peak pulse / overcurrent protection (1500 A power, 36 A data peak pulse). NDAA-compliant. The Chicago choice for top-tier UniFi devices needing both maximum power AND multi-gig data — like high-end APs running 10G uplinks or 90W-class PoE+++ cameras.
No products match your current filters.
About PoE Injectors
PoE injectors add Power over Ethernet capability to network connections where the upstream switch does not provide PoE. They are commonly used to power individual cameras, access points, or intercom stations at remote locations or in retrofit installations where replacing the switch is not practical.