Paxton Touchlock Vandal-Resistant Metal Keypad (521-715) — Standalone PIN-Only Outdoor Access Keypad for Chicago
Model / Series: Touchlock Vandal Metal (521-715)
The Paxton Touchlock Vandal-Resistant Metal Keypad (521-715) is a standalone PIN-only access control keypad in cast metal housing — controls a single door without a separate Net2 / Switch2 / Paxton10 controller. Backlit keypad, IPX7 weatherproof, security-fixing screws, supplied with metal mounting plate or surface mounting box. The Chicago choice for single-door PIN-only access at outdoor sheds, garages, gates, mechanical rooms, storage areas where a full networked access platform is overkill.
Specifications
- Brand
- Paxton
- Model
- Touchlock Vandal Metal (521-715)
- Series
- Paxton Touchlock
- Form Factor
- Standalone PIN-only keypad with cast metal housing
- Card Reader
- None — PIN-only standalone keypad (no card / token reading)
- Keypad
- Backlit metal keys with security fixing screws
- Operation Mode
- Standalone single-door access — built-in controller (no separate Net2 / Switch2 / Paxton10 needed)
- Authentication
- PIN code (programmable users)
- Cable Length
- 5 m
- Dimensions
- 89 W × 28 D × 143 H mm
- Power
- 12 VDC
- Operating Temperature
- Outdoor-rated
- Environmental Protection
- IPX7 (weatherproof, suitable for external use)
- Mounting
- Cast metal housing with choice of metal mounting plate or metal surface mounting box (4 large security fixings)
Best Fit & Recommended For
Paxton Touchlock Vandal-Resistant Metal Keypad (521-715) — Standalone PIN-Only Single-Door Access
The Paxton Touchlock Vandal-Resistant Metal Keypad (521-715) is a standalone single-door PIN-only access keypad from Paxton’s Touchlock series — cast metal housing for outdoor / vandal-prone positions, backlit keypad with security fixing screws, IPX7 weatherproof, 5 m cable length. Includes a built-in controller — no separate Net2, Switch2, or Paxton10 system required.
The Touchlock Vandal Metal Keypad is the Chicago choice for single-door PIN-only access where a full networked access control platform is overkill — outdoor sheds, detached garages, mechanical rooms, gates, pool / amenity-area access, construction-site entries, and any auxiliary single-door application requiring vandal-resistant outdoor PIN entry.
Why Standalone Beats Networked for Some Doors
For most commercial doors, networked access control (Net2, Switch2, Paxton10, Brivo, HID, etc.) is the right answer — centralized credential management, audit trails, multi-property federation. But for single-door auxiliary applications, networked AC is overkill:
- Outdoor sheds, outbuildings — only a few users need PIN access
- Mechanical rooms — only maintenance staff
- Pool / amenity gates — fixed-PIN per amenity season
- Detached garages — single household PIN
- Construction-site temporary access — short-term, no token logistics
- Storage areas — limited number of authorized users
The Touchlock is self-contained: install the keypad, wire it to the lock, program PINs, done. No controller, no network, no software. Perfect for the use cases above.
Vandal-Resistant Metal Construction
The 521-715 is the vandal-resistant metal variant of the Touchlock series:
- Cast metal housing — withstands kicks, bats, brick impacts
- Choice of mounting plate or surface mounting box — both metal
- 4 large security fixings — tamper-resistant mounting (cannot pry off with screwdriver)
- Backlit keypad for nighttime use
- IPX7 outdoor-rated — survives Chicago weather
- 5 m cable for flexibility in install location
For exposed outdoor positions where vandalism is a real concern (and most outdoor single-door applications fit this profile), the metal Touchlock is the right reliability investment.
Touchlock vs. Networked Paxton Keypad Readers
| Feature | Touchlock Vandal Metal (521-715, this) | KP50 (355-110) | KP75 MIFARE Metal (375-130) | Paxton10 Keypad (010-824) |
|---|---|---|---|---|
| Platform | Standalone (no controller) | Net2 / Switch2 | Net2 / Switch2 | Paxton10 cloud |
| Card support | None — PIN only | 125 kHz | MIFARE | Multi-format (6) |
| Vandal rating | IPX7 cast metal | IP67 plastic | IK10 metal | IK10 |
| Best fit | Single-door outdoor PIN-only | Indoor 2-factor on Net2 | Outdoor 2-factor MIFARE on Net2 | Cloud 2-factor |
| Networked admin | No (local PIN management) | Yes (Net2 software) | Yes (Net2 software) | Yes (cloud) |
Where the Paxton Touchlock Vandal Metal Keypad Wins in Chicago
- Chicago outdoor shed and outbuilding access — HOA storage, maintenance buildings at suburban Chicagoland HOAs
- Garage / detached-garage pedestrian door access (single-door PIN-only)
- Mechanical / electrical room exterior doors at commercial properties
- Construction site temporary access — PIN-only, no token logistics
- Pool / amenity-area gates at HOA / multi-tenant residential properties
- Storage area access at retail back-of-house
- Industrial small-shed / utility-room exterior doors
- Restaurant / hospitality back alley service entries
- Property management single-door auxiliary access where networked AC is overkill
- Schools / educational facility outdoor utility / equipment building access
Local Chicago Coverage
Vidimost installs the Paxton Touchlock Vandal-Resistant Metal Keypad across the full Chicago metropolitan area for standalone single-door PIN-only outdoor applications.
Recommended Pairings (for Mixed Deployments)
When a property needs both networked AC at primary doors AND standalone PIN at auxiliary doors:
- Paxton KP50 (355-110) — networked Net2 keypad for primary 2-factor doors
- Paxton KP75 MIFARE Metal (375-130) — networked Net2 vandal-metal keypad for primary outdoor 2-factor
- Paxton Touchlock Vandal Metal (this) — standalone for auxiliary outdoor doors
Professional Installation by Vidimost
Vidimost LLC is an active Paxton installer across Chicago. The Touchlock Vandal Metal Keypad is our standard standalone single-door PIN keypad for Chicago HOA, property management, industrial, education, retail, and hospitality auxiliary outdoor applications. Full-scope service includes site walkthrough, single-door wiring (12 VDC + lock relay), vandal-resistant metal mounting with security fixings, PIN programming for authorized users, and operator training. Contact us for a free site walkthrough and quote.
Frequently Installed Together
Paxton
Paxton KP50
The Paxton KP50 (355-110) combines a 125 kHz proximity reader with an integrated PIN keypad in a single unit for Paxton Net2 / Switch2 systems — supports card + PIN 2-factor authentication. Standard 2" wall-mount form factor, IP67 outdoor weatherproof. The Chicago choice for sensitive-area 2-factor doors on Paxton Net2 / Switch2 — banking back-office, healthcare restricted areas, server rooms.
View →Paxton
Paxton KP75 MIFARE
The Paxton KP75 MIFARE (375-130) is a vandal-resistant metal-housed combined MIFARE 13.56 MHz proximity reader + PIN keypad for Paxton Net2 / Switch2 — supports MIFARE DESFire smart cards + PIN 2-factor authentication. Heavy-duty metal housing for outdoor / vandal-prone positions, 3" form factor with 4" read range. The Chicago choice for outdoor sensitive-area 2-factor entries on Paxton Net2 / Switch2 — schools, parking decks, public buildings with MIFARE credentials.
View →