Altronix ALTV1224DC2 — 16-Output CCTV Camera Power Supply (12/24 VDC @ 6A) | Vidimost Chicago
Model / Series: ALTV1224DC2
The Altronix ALTV1224DC2 is a 16-output CCTV camera and accessory power supply — converts 115 VAC / 50-60 Hz into 12 VDC or 24 VDC distributed across 16 fuse-protected outputs (3.5 A per output, 6 A total). Filtered and electronically regulated. BC300 enclosure. The Chicago choice for mid-size CCTV deployments where 16 cameras / accessories need distributed regulated DC power from one centralized box.
Specifications
- Brand
- Altronix
- Series
- Altronix ALTV1224DC
- Model
- ALTV1224DC2
- Form Factor
- Indoor wall-mount CCTV camera and accessory power supply; BC300 enclosure
- Input
- 115 VAC, 50/60 Hz, 2.55 A
- Outputs
- 16 fuse-protected outputs
- Output Voltage
- 12 VDC or 24 VDC selectable
- Total Output Current
- 6 A continuous
- Per-Output Rating
- 3.5 A fused
- Output Conditioning
- Filtered and electronically regulated
- Use Case
- CCTV camera and accessory power
Best Fit & Recommended For
Altronix ALTV1224DC2 16-Output CCTV Power Supply
The Altronix ALTV1224DC2 is a multi-output power supply purpose-built for CCTV camera and accessory power — converts 115 VAC into 12 VDC or 24 VDC distributed across 16 fuse-protected outputs (3.5 A per output, 6 A total continuous current). The Chicago go-to power supply for mid-size camera deployments (8–16 cameras) that consolidate to a single centralized power box rather than running individual PoE injectors per camera.
What’s Confirmed by the Official Altronix Spec
These specifications come directly from Altronix’s published ALTV1224DC2 product page:
- Input: 115 VAC, 50/60 Hz, 2.55 A
- Outputs: 16 fuse-protected outputs
- Output voltage: 12 VDC or 24 VDC selectable
- Total output current: 6 A continuous
- Per-output rating: 3.5 A fused
- Output conditioning: filtered and electronically regulated
- Enclosure: BC300 (indoor wall-mount)
When ALTV1224DC2 Fits — CCTV Multi-Camera
Pick the ALTV1224DC2 when:
- The project has 8–16 cameras that benefit from centralized power (rather than one PoE switch port per camera)
- Cameras are not PoE (or PoE budget on the network switch is insufficient and dedicated power is preferred)
- Distributed fused outputs are required so a fault on one camera doesn’t take down all cameras
- Voltage flexibility is needed (some legacy cameras 12 VDC, some newer cameras 24 VDC)
For larger deployments (32+ cameras), use multiple ALTV1224DC2 units. For smaller (5-camera) CCTV power, the Altronix AL600ULMX is more economical.
Where the ALTV1224DC2 Wins in Chicago
- Commercial CCTV deployments with 8–16 camera count per power box
- Multi-tenant residential CCTV camera power
- Office building CCTV multi-camera deployments
- Healthcare facility CCTV camera power
- Education facility CCTV deployments
- Hospitality property CCTV camera power
- Retail back-of-house and storefront CCTV camera power
- Industrial / warehouse perimeter CCTV camera power
- Government / municipal facility CCTV deployments
- Property management portfolio standardized CCTV power
Local Chicago Coverage
Vidimost installs the Altronix ALTV1224DC2 across the full Chicago metropolitan area for mid-size CCTV multi-camera deployments.
Recommended Pairings
- Altronix AL600ULMX — 5-output sibling for smaller CCTV deployments
- Altronix SMP3ET — small 6/12 VDC power supply for single-device applications
- CCTV Power Supplies overview — full Vidimost CCTV power family
Professional Installation by Vidimost
Vidimost LLC installs the Altronix ALTV1224DC2 across Chicago for CCTV multi-camera power deployments. Full-scope service includes site walkthrough, camera-count and current-budget planning, voltage selection per camera, enclosure mounting, AC primary wiring, distributed cable runs to each camera with appropriate gauge for distance, and troubleshooting / commissioning. Contact us for a free site walkthrough and quote.
Frequently Installed Together
Altronix
Altronix AL600ULMX
The Altronix AL600ULMX is a 5-output Class 2 multi-output power supply / charger — 115 VAC input, 12 / 24 VDC selectable, 6 A total continuous current, individually-protected outputs. Lighter-duty companion to the ACM access power controllers when the project just needs distributed clean power without per-output fail-safe / fail-secure switching. The Chicago choice for CCTV multi-camera deployments and access control sites where the panel handles fail-mode switching and the AL600ULMX just delivers stable distributed power.
View →Altronix
Altronix SMP3ET
The Altronix SMP3ET is a compact single-output power supply / charger — converts 115 VAC into a selectable 6 VDC or 12 VDC output at 2.5 A continuous, with built-in charger for sealed lead-acid / gel batteries and automatic switchover to standby battery on AC failure. Filtered and electronically regulated, with short-circuit and thermal overload protection. The Chicago choice for compact single-device installations — small access panels, low-current cameras, intercom auxiliary power.
View →Altronix
Altronix AL600ULACM
The Altronix AL600ULACM is an 8-output access power controller with built-in 6 A power supply / charger — converts 115 VAC into eight independently-controlled 12 / 24 VDC fail-safe / fail-secure outputs (6 A total). Fused-relay outputs (3.5 A per output, 10 A main fuse), Fire Alarm disconnect (latching / non-latching) per output, AC fail supervision, built-in battery charger (0.7 A max). The Chicago choice for higher-current multi-door access control with code-compliant fire-alarm interlock.
View →